DSL-2640U Wireless ADSL2+ Router with Ethernet WAN Support
User Manual
Configuring via Web-based Interface
CHAPTER 4. CONFIGURING VIA WEB-BASED
INTERFACE
Initial Configuration Wizard
To start the Initial Configuration Wizard, go to the Initial Configuration section. On the opened
page, click the OK button and wait until the factory default settings are restored.
Figure 18. Restoring the default settings in the Wizard.
Click the START button.
Figure 19. Starting the Wizard.
On the opened page, click YES in order to leave the current language of the web-based interface or
click NO to select another language.
Figure 20. Selecting a language.
Page 32 of 174
To Next Page
Loading...
