DSL-2740E User Manual
72
The following table describes the parameters and buttons of this page.
Field Description
Multicast allowed Enable multicast proxy, only for route mode.
Robust Count
Allows tuning for the expected packet loss on a link. It
determines how many times a startup query should
be xmitted.
Last Member
Query Count
This parameter specifies the times the device sends
the query message.
Query Interval
The device sends query messages to check IGMP
user periodically. The unit is second.
Query Response
Interval
The device waits for the IGMP user’s reply. The unit is
100 * millisecond.
Group Leave
Delay
The duration for the modem to cease forwarding
multicast packets after a corresponding IGMP "Leave
Group" message has been successfully offered to the
modem.
Click Apply Changes to save the settings.
To Next Page
Loading...
Need help?
Data Transfer Rates
