DSL-2740E User Manual
93
Field Description
view configuration settings and statistics and
update the router's firmware.
3.4.4 Diagnostics
3.4.4.1 Ping Diagnostic
Choose Maintenance > Diagnostics > Ping. The page shown in the following
figure appears. This page allows you to ping a Host to test whether your router can
be connected to the netwrok.
The following table describes the parameter and button of this page:
Field Description
Host Enter the valid IP address or domain name.
Ping Click it to start to Ping.
3.4.4.2 Ping6
Choose Maintenance > Diagnostics > Ping6. The page shown in the following
figure appears. The target Address can be a domain or IPv6 address.