Installation
1. Insert the CD-ROM into your computer.
2. Follow the on-screen instructions.
3. The icon should appear in the System Tray at the lower-right corner on the desktop and a new Icon should be created on the desktop.
Set up the D-Link Router
1. Connect the D-Link Router to the network.
2. Power on the D-Link Router.
3. Double-click on the icon to open the D-Link D-Link Link’n Print.
4. Right-click on in the System Tray at the lower-right corner on your Windows Desktop. To click on “Configuration…” and a pops up
window will display the D-Link Router management GUI.
5. To logon the device management GUI and navigate to USB setup page.
6. To select “Enable Link’n Print ” and following by click “Apply” button.
To Next Page
Loading...
