SNMP SETUP
Simple Network Management Protocol (SNMP) allows a management application to retrieve statistics and status from the SNMP agent in this
device. Select the desired values and click "Apply" to configure the SNMP options.
To access the SNMP SETUP setting window, click on the SNMP SETUP button in the ADVANCED tab
SNMP CONFIGURATION
Please tick Enable the SNMP Agent
Please type the Read Community, Set
Community to match with the SNMP query.
Please type System Name, System Location
and System Contact to describe the
DSL-2880AL’s related information.
Please type the trap IP on the Trap Manager IP
Please click the Apply button to save the
setting.
To Next Page
Loading...
