Welcome to the D-Link Wireless Security Setup Wizard
Enable Your Wireless Network Your wireless network is enabled by
default. You can simply uncheck the below checkbox to disable wireless
Network Name (SSID) identifies members of the Service Set. Accept the
default name or change it to something else. If the default SSID is
changed, all the previous connected wireless devices on the wireless
network must reconfigure their wireless connection setting as the AP
setting change will not apply to the client automatically.
Manually assign a network key You can also set it manually if you do not
prefer the key we generate. Type a string (8-63 characters, such as a~z, A~Z, or
0~9.) on the Pre-Shared key.
Click Next button to go to the next page.
Click Cancel button to return to the main menu of Wireless Setup page.
Check your wireless network setting.
Click Save button to apply your setting.
Click Prev button to pre-page to modify your setting.
Click Cancel button to cancel your setting.
To Next Page
Loading...
Need help?
General
