Section 3 - Configuration
D-Link DSL-2880AL User Manual
USB STORAGE FILE SERVER
USB Storage Server allows you to share your USB storage device to all
the connected local hosts.
First connect your USB Storage device to the USB port. Then enter the
data below.
To configure USB port to USB Storage server setting, choose Enable
USB Storage Server in the USB Setup page and press Apply button,
To setup USB Storage Server, press Setup button in STORAGE SETUP
window enter the server configuration page
USB DEVICE STATUS can check the USB Device Status and press
Status Refresh button to refresh the status.
Press Safely Remove Device button to safely remove device.
To Next Page
Loading...
