13D-Link DSL-X1852E User Manual
Section 2 - Installation
Connect the supplied power adapter to the router and a power outlet, and press the power button. The device LEDs
will light up. Wait approximately three minutes before proceeding to the next step.
Caution: Use only the included power adapter with this product.
Plug one end of the supplied Ethernet cable into a yellow Ethernet port on the back of the router, and the other end
into the Ethernet port on your computer.
If you are setting up the DSL-X1852E using a laptop or mobile device, connect to it using the Wi-Fi network name
and password printed on the label attached to the bottom of your device.
4
5
DSL-X1852E
Power
NB
DSL
DSL-X1852E
WALL JACK
POWER OUTLET
PC
PC
To Next Page
Loading...
