D-Link DSL-X1852E - Connection Type: Bridge Mode

41D-Link DSL-X1852E User Manual
Section 4 - Conguration
Connection Type: Bridge Mode
Select Bridge Mode to use the DSL-X1852E as a network bridge to extend an
existing network.
IPv4 Settings
Connection: Select Bridge Mode.
Protocol Select IPv4, IPv6 or IPv4/IPv6 for both IPv4 and IPv6 addressing
mechanism.
Connection Type: Select Bridged Only LLC or Bridged Only VC-Mux as the
encapsulation method. This is only available for ADSL.
Click Save when you are done. Or click Delete to delete the conguration
prole for the interface.