D-Link DSL-X1852E - Wireless Configuration

47D-Link DSL-X1852E User Manual
Section 4 - Conguration
You can congure your wireless LAN (WLAN) on this page. To access this page,
go to Settings > Wireless.
Smart Connect
The Smart Connect feature presents a single wireless network. When
connecting clients to an extended network, they will be automatically
added to the best band, either 2.4 GHz or 5 GHz. You can choose to
disable the Smart Connect feature and individually congure 2.4 GHz
and 5 GHz networks as below:
2.4 GHz
Status: Enable or disable the 2.4 GHz wireless network.
Wi-Fi Name (SSID): Create a name for your wireless network.
Password: Create a password to use for wireless security. The password must
contain 8 to 63 alphanumeric characters including a mix of uppercase
and lowercase letters, numbers and special characters with the
exception of the following characters: '-;`=%+&|><"/ .
Show Password: Enable or disable display of the above password.
5 GHz
Status: Enable or disable the 5 GHz wireless network.
Wi-Fi Name (SSID): Create a name for your wireless network.
Password: Create a password to use for wireless security. The password must
contain 8 to 63 alphanumeric characters including a mix of uppercase
and lowercase letters, numbers and special characters with the
exception of the following characters: '-;`=%+&|><"/ .
Show Password: Enable or disable display of the above password.
Wireless