92D-Link DSL-X1852E User Manual
Section 4 - Conguration
Diagnostics
This page provides functions to test the router's connection to another device
in the Internet. To access this page, go to Management > Diagnostics. Select
the Ping Test or Traceroute Test tab. The ping test veries the availability of
a destination host while traceroute shows the route of data transferred to a
destination host.
For Ping Test, enter the IP address or web address in the Destination Address
eld, choose the WAN Interface through which the packets will be transferred,
enter the number of ICMP packets (1-10) to be sent, then click Start.
For Traceroute Test, choose the WAN Interface through which the packets will
be transferred, enter the IP address or web address in the Destination Address
eld, then click Start.
The results of the test will be displayed in the text box below.
To Next Page
Loading...
