D-Link DSL-X1852E User Manual

35D-Link DSL-X1852E User Manual
Section 4 - Conguration
Connection Types
Connection Type: Dynamic IP (DHCP)
Select Dynamic IP Address (DHCP) to obtain an IP address automatically
from your ISP. Select this option if your ISP does not provide you with a specic
IP address.
IPv4 Settings
Connection: Select Dynamic IP Address (DHCP).
Service List: Select a service type from the list. Choose from INTERNET,
TR069_INTERNET, VOICE, VOICE_INTERNET, TR069_VOICE,
TR069_VOICE_INTERNET, TR069, or OTHER. This information should
be provided by your ISP. If you are conguring your connection
manually and your ISP has not specied this setting, INTERNET is
recommended.
Protocol: Select IPv4, IPv6 or IPv4/IPv6 for both IPv4 and IPv6 addressing
mechanism. If you choose IPv6, refer to the below IPv6 Settings.
Advanced Settings
MTU: Maximum Transmission Unit - you may need to change the MTU for
optimal performance with your ISP. The default is 1500.
NAT Enable: Network address translation (NAT) translates private IP addresses to
public IP addresses prior to allowing private IP networks to connect
to the public network. This option is not available for related voice
service types such as VOICE, VOICE_INTERNET, and TR069_VOICE and
TR069.
Connection Type: Select Bridged IP LLC or Bridged IP VC-Mux as the encapsulation
method. This is only available for ADSL.

D-Link DSL-X1852E Specifications

General

Brand	D-Link
Model	DSL-X1852E
Category	Network Router
Language	English