D-Link DSL-X1852E User Manual

39D-Link DSL-X1852E User Manual
Section 4 - Conguration
Connection Type: PPPoE
Select PPPoE if your ISP provides and requires you to enter a PPPoE username
and password in order to connect to the Internet.
WAN Settings
Connection: Select PPPoE.
Service List: Select a service type from the list. Choose from INTERNET, TR069_
INTERNET, VOICE, VOICE_INTERNET, TR069_VOICE, TR069_
VOICE_INTERNET or TR069, or OTHER. This information should
be provided by your ISP. If you are conguring your connection
manually and your ISP has not specied this setting, INTERNET is
recommended.
Protocol Select IPv4, IPv6 or IPv4/IPv6 for both IPv4 and IPv6 addressing
mechanism. If you choose IPv6, refer to the below IPv6 Settings.
Username: Enter the username provided by your ISP.
Password/Conrm
Password:
Enter the password provided by your ISP. Then enter it again to conrm
your entry.
Connection Type: Select PPPoE LLC or PPPoE VC-Mux.
Advanced Settings
MTU: Maximum Transmission Unit - you may need to change the MTU for
optimal performance with your ISP. The default is 1500.

D-Link DSL-X1852E Specifications

General

Brand	D-Link
Model	DSL-X1852E
Category	Network Router
Language	English