DVG-7111S User’s Manual MAINTENANCE
D-Link Systems, Inc. 80
3-3-7 Provision
Provisioning is a function that automatically updates your VoIP TA’s configuration by using a TFTP,
FTP, or HTTP server located on the Internet. If you have access to such service, you will need to know
the URL or IP address of the Provisioning Server.
Note: Fill in the parameters needed by your VoIP Service Provider. Please check with your VoIP
Service Provider about the availability of these services.
MAINTENANCE → Provision
Enable Provisioning: Check the box to start provisioning.
Profile URL: Enter the Provisioning Server’s IP address or URL required by your VoIP Service
Provider.
Connect Provision Server During Start Up: Check the box to connect to Provisioning Server when
the VoIP TA is powered on or rebooted.
Connect Provision Server Periodically: Check the box to connect to Provisioning Server periodically.
Auto Provision Interval: Enter the time for auto provisioning.
Random Offset: Enter the offset of the time for auto provisioning.
Provision Retry Times: Enter the retry time if a provisioning attempt fails.
Retry Interval: Enter the interval for retrying.
Suspend Service: Check the box to stop VoIP call service.
Note: Contact your server provider if necessary.
To Next Page
Loading...
