D-Link DVG-N5412SP - Page 33

DVG-N5412SP User’s Manual SETUP
D-Link Systems, Inc. 33
SETUP -> Wireless Setup -> Site Survey
Site Survey
When wireless client mode is enabled, click the Refresh button to display any Access Point on your
wireless network so that a wireless client can obtain SSID, BSSID, Channel, Type, Encryption, and Signal
through scanning using this Site Survey tools.
Example:
1. Select the Wireless AP and click Accept bottom.
2. Enter the password of the Wireless AP and click Apply bottom.
3. Save the configuration and restart DVG-N5412SP.