802.11 b/g Access Point Command Line Interface Manual
12
set MulticastPacketControl Enable or Disable Multicast Packet Control
set MulticastPacketControl [0:1]
Explanation: 0=disable:1=enable
set MaxMulticastPacketNumber
Set Max Multicast Packet Number set MaxMulticastPacketNumber [0-256]
Security
Del Command: Function Syntax
del key Delete Encryption key del key [1-4]
Get Command: Function Syntax
get encryption Display (WEP) configuration state (enabled or disabled) get encryption
get authentication Display Authentication Type get authentication
get cipher
Display Encryption cipher type
Explanation:
Response WEP for choosing WEP
Response Auto for choosing WPA-Auto
Resopnse AES for choosing WPA-AES
Response TKIP for choosing WPA-TKIP
get cipher
get keysource
Display Source Of Encryption Keys:
Explanation:
Response Flash Memory for static key
Response Key Server for dynamic key
Response mixed for mix static and dynamic key
get keysource
get key Display specified WEP encryption Key get key [1-4]
get keyentrymethod Display Encryption Key Entry Method ASCII or Hexadecimal get keyentrymethod
get passphrase Display WPA Passphrase get passphrase
get groupkeyupdate Display WPA Group Key Update Interval (in Seconds) get groupkeyupdate
Set Command: Function Syntax
set encryption Enable or Disable Encryption Mode set encryption [disable: enable]
set authentication Set Authentication Type
set authentication [open-system: shared-key: auto: WPA:
WPA-PSK: WPA2: WPA2-PSK:WPA-AUTO:WAP2-AUTO-PSK]
set cipher Set Cipher of wep, aes, tkip, or auto negotiate set cipher [wep:aes:tkip:auto]
set groupkeyupdate Set Group Key Update Interval (in Seconds) for TKIP set groupkeyupdate <seconds>
set key Used to set the specified wep key value and size
set key [1-4] default
set key [1-4] [40:104:128] < value>
set keyentrymethod Select Between ASCII or HEX encryption key format set keyentrymethod [asciitext : hexadecimal]
set keysource Select Source of Encryption Keys: static(flash), dynamic (server), mixed
set keysource [flash:server:mixed]
set passphrase Modify Passphrase set passphrase <new passphrase>
To Next Page
Loading...
