D-Link DWR-111 - Dynamic IP (DHCP)

14D-Link DWR-111 User Manual
Section 3 - Conguration
Dynamic IP (DHCP)
(Optional) Required by some ISPs.
(Optional) Fill in with IP address of primary
DNS server.
(Optional) Fill in with IP address of secondary
DNS server.
You may need to change the Maximum
Transmission Unit (MTU) for optimal
performance. The default value is 1500.
The default MAC Address is set to the
Internet port’s physical interface MAC
address on the Broadband Router. It is
not recommended that you change the
default MAC address unless required by
your ISP. You can use the Clone Your PC’s
MAC Address button to replace the Internet
port’s MAC address with the MAC address
of your PC.
This feature enables this product to renew
WAN IP address automatically when the
lease time is expiring.
Click Save Settings to save your changes,
or click Don’t Save Settings to discard your
changes.
This section will help you to obtain IP Address information automatically from your ISP. Use this option if your ISP didn’t provide you with IP Address
information and/or a username and password.
Host Name:
Primary DNS Server:
Secondary DNS Server:
MTU (Maximum
Transmission Unit):
MAC Address:
Auto-reconnect: