D-Link DWR-111 - DHCP Server Settings

28D-Link DWR-111 User Manual
Section 3 - Conguration
Select this box to enable the DHCP server on your
router.
Enter the starting and ending IP address for the
server’s IP assignment.
The time period for the IP address lease. Enter the
Lease time in minutes.
Assign a primary DNS Server to DHCP clients.
Assign a secondary DNS Server to DHCP clients.
Assign a primary WINS Server to DHCP clients.
Assign a secondary WINS Server to DHCP clients.
Click Save Settings to save your changes, or click
Don’t Save Settings to discard your changes.
Enable DHCP
Server:
DHCP IP Address
Range:
DHCP Lease Time:
Primary DNS IP
Address:
Secondary DNS IP
Address:
Primary WINS IP
Address:
Secondary WINS IP
Address:
DHCP Server Settings
The DWR-111 has a built-in DHCP (Dynamic Host Control Protocol) server. The DHCP server assigns IP addresses to devices on the network that
request them. By default, the DHCP server is enabled on the device. The DHCP address pool contains a range of IP addresses, which is automatically
assigned to the clients on the network.