D-Link DWR-111 - Inbound Filter

35D-Link DWR-111 User Manual
Section 3 - Conguration
INBOUND FILTER SETTING
Select this box to Enable the lter.
You may select Always On or choose the number
of a schedule rule that you have dened.
Copies the predened lter to the specied ID
INBOUND FILTER RULES LIST
Identies the lter.
Specify the local IP address and then specify the
port after the colon.
Specify the remote IP address and then the port
after the colon.
Select this box to enable the lter.
Specify the schedule rule number.
Go back to the previous lter page.
Advance to the next lter page.
Click Save Settings to save your changes, or click
Don’t Save Settings to discard your changes.
Inbound Filter
Inbound Filter:
Use Schedule Rule:
Copy to ID:
ID:
Source IP : Ports:
Destination IP :
Ports:
Enable:
Schedule Rule #:
Previous Page:
Next Page:
Inbound Filter enables you to control what packets are allowed to passthrough the router. Inbound lter only applies to packets that are destined
for Virtual Servers or DMZ hosts.