5D-Link DWR-111 User Manual
Section 2 - Installation
Installation
This section will guide you through the installation process. Placement of the router is very important. Do not place the router in an enclosed area
such as a closet, cabinet, or in an attic or garage.
Connect to Your Network
Note: Ensure that your DWR-111 Wireless N150 Wi-Fi Router is disconnected and powered o before performing the installation steps below.
1. Connect a USB modem to the USB port on the back of the router.
2. Insert a LAN network cable into the LAN port on the back of the router. Plug the other end of the LAN cable into the LAN port of your computer
or laptop. The Ethernet LED will turn green if the Ethernet connection is successfully established.
Note: The DWR-111 Wireless N150 Wi-Fi Router LAN Port is “Auto-MDI/MDIX.” Therefore, patch or crossover Ethernet cables can be used.
3. Congure the device using the setup utility.
To Next Page
Loading...
