EasyManua.ls Logo

D-Link DWR-111 - L2 TP

D-Link DWR-111
82 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
19D-Link DWR-111 User Manual
Section 3 - Conguration
L2TP
Choose this Internet connection if your ISP provides you with a L2TP account.
Choose Static IP only if your ISP assigns you an IP
address. Otherwise, please choose Dynamic IP.
Enter the information provided by your ISP.
(Only applicable for Static IP L2TP.)
Enter the information provided by your ISP.
(Only applicable for Static IP L2TP.)
Enter the information provided by your ISP.
(Only applicable for Static IP L2TP.)
IP address of L2TP server.
User/account name that your ISP
provides to you for L2TP dial-up.
Password that your ISP provides
to you for L2TP dial-up.
Fill in with the same password in Password eld.
Choose Always-on when you want to establish
L2TP connection all the time. Choose Connect-
on-demand if the device will establish a L2TP
connection when local users want to surf
Internet, and disconnect if there is no trac
after time period of Maximum Idle Time.
Address Mode:
L2TP IP Address:
L2TP Subnet Mask:
L2TP Gateway IP
Address:
L2TP Server IP
Address:
Username:
Password:
Verify Password:
Reconnect Mode:

Related product manuals