D-Link DWR-111 - Admin

41D-Link DWR-111 User Manual
Section 3 - Conguration
ADMINISTRATOR
Enter a password that the admin account will use to access
the router’s management interface.
Conrm the chosen password.
REMOTE MANAGEMENT
Remote management allows the DWR-111 to be congured
from the Internet using a web browser. A username and
password is still required to access the Web-management
interface. Usually only a member of your network can
browse the built-in web pages to perform Administrator
tasks. This feature enables you to perform Administrator
tasks from a remote (Internet) host.
Enter the Internet IP address of the PC that has access to the
broadband router. If you enter an asterisk (*) in this eld,
then anyone will be able to access the Router. Adding an
asterisk (*) into this eld could present a security risk and
is not recommended.
This is the port number used to access the router. Example:
8080 is the port used for the Web-management interface.
Click Save Settings to save your changes, or click Don’t
Save Settings to discard your changes.
Admin
The Admin page allows you to change the Administrator password and enable Remote Management. The Admin has read/write access while the
user has read-only access. Only the admin has the ability to change both admin and user account passwords.
New Password:
Conrm Password:
Enable Remote
Management:
IP Allowed to
Access:
Port: