D-Link DWR-111 - Page 26

22D-Link DWR-111 User Manual
Section 3 - Conguration
The time of no activity to disconnect established 3G
session. Set it to zero or choose Auto in Reconnect
Mode to disable this feature.
(Optional) Fill in if provided by your ISP. If not, keep
the default value.
(Optional) Fill in if provided by your ISP. If not, keep
the default value.
Disable or Use LCP Echo Request. It depends on ISP
requirement.
Disable Network Address Translation
Activate this feature to change Ethernet WAN port
to LAN port.
Click Save Settings to save your changes, or click
Don’t Save Settings to discard your changes.
Maximum Idle Time:
Primary DNS Server:
Secondary DNS
Server:
Keep Alive:
NAT disable:
Bridge Ethernet
Ports: