D-Link DWR-961 - IPv6 WAN Setting

23D-Link DWR-961 User Manual
Section 3 - Conguration
IPv6 WAN Setting
On this page you can congure your router’s IPv6 WAN connection by changing the connection type and specifying which interface to use.
WAN Interface Setup
Enable IPv6 Check this to enable or disable IPv6.
Origin Type Select either DHCPv6 or Static.
WAN Link
Type
Select the WAN interface to use for the IPv6 connection.
Stateless
Address Auto
Conguration
Select this to enable stateless address autoconguration.
Stateful
Address Auto
Conguration
Select this to enable stateful address autoconguration.
DUID Indicates the DHCP unique identier.
PD Enable Check this to enable prex delegation.
Rapid-
commit
Enable
Check this to enable rapid two-message conguration with the
client.