D-Link DWR-961 - MAC Filter

34D-Link DWR-961 User Manual
Section 3 - Conguration
MAC Filter
This page allows you to create a list of clients that will be able or unable to connect to your Wi-Fi network. Clients are ltered based on their MAC
addresses.
MAC Filter
MAC Address
Filter Mode
Set this to Allow or Deny to either disallow or accept
connections by default. Set this to Disable to disable the MAC
address lter.
Add Click this to add a new MAC address to the lter list.
OK Click this to conrm the addition.
Delete All Click this to delete all MAC addresses from the lter list.