D-Link DWR-961 - WPS Configuration

33D-Link DWR-961 User Manual
Section 3 - Conguration
WPS
The Wi-Fi Protected Setup (WPS) page allows you to create a wireless connection between your router and a device by pushing the WPS button
on the router or entering a PIN code.
WPS
Band Select either 2.4GHz or 5GHz.
Enable Check this to enable WPS.
Congure
Method
Choose whether to connect your devices via the WPS button
on your router or by entering a PIN code. The PIN method is less
secure and is not recommended.
Enrollee PIN If PIN is selected, enter the PIN code to use to create a
connection.