D-Link DWR-961 - RADVD Configuration

41D-Link DWR-961 User Manual
Section 3 - Conguration
RADVD
This page allows you to congure the router advertisement daemon (RADVD). Refer to the Linux man pages for the RADVD tool for more
complete information.
Conguring Router Advertisement
Enable Click this to enable the router advertisement daemon.
radvdinterfacename Enter the interface to apply these settings to.
MaxRtrAdvInterval The maximum period allowed between unsolicited multicast
router advertisements, in seconds.
MinRtrAdvInterval The minimum period allowed between unsolicited multicast
router advertisements, in seconds.
MinDelayBetweenRAs The minimum time allowed between solicited multicast router
advertisements, in seconds.
AdvManagedFlag When set, hosts use the stateful protocol for address
autoconguration. Click to set this ag to on.
AdvOtherCongFlag When set, hosts use the stateful protocol for autoconguration
of other information. Click to set this ag to on.
AdvLinkMTU This value will be substituted as the MTU value in router
advertisement messages for all nodes when the link MTU is not
well-known.