D-Link DWR-961 - Date and Time Settings

60D-Link DWR-961 User Manual
Section 3 - Conguration
Date and Time
On this page you can change your time zone and select a Network Time Protocol (NTP) to use.
Date and Time
Current
System Time
Displays the system time. Click Sync with host to obtain the
current time from an NTP server.
Time Zone Select your time zone.
Enable
Daylight
Saving
Click this to enable Daylight Saving Time.
Start Date Specify the start date of Daylight Saving Time.
End Date Specify the end date of Daylight Saving Time.
Time Server
Address 1/2/3
Enter the primary and backup NTP servers to obtain the current
time from.