D-Link DWR-961 - QoS (Quality of Service)

52D-Link DWR-961 User Manual
Section 3 - Conguration
QoS
The QoS Engine improves the performance of certain bandwidth or latency-sensitive applications by prioritizing these types of trac over
others.
QoS Rules
Enable QoS Click this to enable the QoS Engine.
Automatic
Uplink Speed
Click this to determine the network’s default uplink speed
automatically. If this is not clicked, enter an uplink speed
manually.
Automatic
Downlink
Speed
Click this to determine the network’s default downlink speed
automatically. If this is not clicked, enter a downlink speed
manually.
Local IP Start Enter a starting IP of a range to apply a QoS rule to.
Local IP End Enter an ending IP of a range to apply a QoS rule to.
Mode Select either Guaranteed minimum bandwidth or Restricted
maximum bandwidth.
Uplink Select the minimum/maximum uplink speed for the range of IPs
in Kbps.
Downlink Select the minimum/maximum downlink speed for the range of
IPs in Kbps.
Delete Click this to delete the QoS rule.