D-Link DXS-1210 Series Hardware Installation Guide

DXS-1210 Series 10 Gigabit Ethernet Smart Managed Switch Hardware Installation Guide
11
Plug the AC power cord into the power socket of the Switch.
Figure 3-7 Connect the power cord to the Switch
Slide the retainer through the tie wrap until the end of the cord.
Figure 3-8 Slide the Retainer through the Tie Wrap

D-Link DXS-1210 Series Specifications

General

Product Series	DXS-1210
Power Supply	Internal
Jumbo Frame Support	9KB
Number of Ports	12
Layer	L2+
Form Factor	Rack-mountable
Uplink Ports	10G SFP+
Operating Temperature	0°C to 40°C
Storage Temperature	-40°C to 70°C