D-Link DXS-1210 Series Hardware Installation Guide

DXS-1210 Series 10 Gigabit Ethernet Smart Managed Switch Hardware Installation Guide
1
1. Introduction
Switch Description
Switch Series
Package Contents
Switch Description
The DXS-1210 series is the latest next generation of Smart Managed switches from D-Link. Switches in this series
feature a wide selection of different ports types and speeds that can be used to interconnect a variety of networking
devices to communicate with each other. The SFP28 and SFP+ ports, with fiber-optical cabling, can be used to uplink
connections that may span over great distances. Switches in this series also implement D-Link’s innovative third
generation Green Ethernet technology (IEEE 802.3az) to save power from links that are inactive by turning LEDs off
based on a customized schedule and by allowing ports to enter a hibernated state automatically.
Switch Series
The following switches are part of the DXS-1210 switch series:
 DXS-1210-28T - Smart Managed Ethernet switch with 24 RJ45 10 Gbps and 4 SFP28 10/25 Gbps ports
 DXS-1210-28S - Smart Managed Ethernet switch with 24 SFP+ 10 Gbps and 4 RJ45 10 Gbps ports
Package Contents
Open the shipping carton of the Switch and carefully unpack its contents. The carton should contain the following
items:
 One DXS-1210 series switch
 One AC power cord
 One AC power cord retainer set
 One console cable (RJ45 to RS-232)
 Four rubber feet with adhesive backing
 One rack mounting kit, containing two brackets and a number of screws
 One quick installation guide
NOTE: If any item is missing or damaged, please contact your local D-Link reseller for replacement.

D-Link DXS-1210 Series Specifications

General

Product Series	DXS-1210
Power Supply	Internal
Jumbo Frame Support	9KB
Number of Ports	12
Layer	L2+
Form Factor	Rack-mountable
Uplink Ports	10G SFP+
Operating Temperature	0°C to 40°C
Storage Temperature	-40°C to 70°C