DXS-3326GSR Stackable Gigabit Layer 3 Switch
Example usage:
To configure a Combination Queue with a Class 6 priority queue, with strict priority, and the remaining Classes as
weighted round robin (WRR) scheduling:
DXS-3326GSR:4# config scheduling 6 max_packet 0
Command: config scheduling 6 max_packet 0
Success.
DXS-3326GSR:4#
show scheduling
Purpose Used to display the currently configured traffic scheduling on the
Switch.
Syntax
show scheduling
Description
The show scheduling command displays the current
configuration for the maximum number of packets (max_packets)
assigned to the seven hardware priority queues on the Switch. At
this value, it will empty the seven hardware priority queues in
order, from the highest priority (queue 6) to the lowest priority
(queue 0).
Parameters None.
Restrictions None.
Example usage:
To display the current scheduling configuration with Class 1 as the strict priority queue of a Combination Queue:
DXS-3326GSR:4# show scheduling
Command: show scheduling
QOS Output Scheduling
MAX. Packets
-------------------
Class-0 1
Class-1 0
Class-2 3
Class-3 4
Class-4 5
Class-5 6
Class-6 7
109
To Next Page
Loading...
