DXS-3326GSR Stackable Gigabit Layer 3 Switch
DXS-3326GSR:4#enable ipif s2
Command: enable ipif s2
Success.
DXS-3326GSR:4#
disable ipif
Purpose Used to disable the configuration of an IP interface on the Switch.
Syntax
disable ipif <ipif_name 12> | all
Description This command will disable an IP interface on the Switch, without
altering its configuration values.
Parameters
<ipif_name 12> − The name previously created to define the IP
interface.
all – Entering this parameter will disable all the IP interfaces
currently configured on the Switch.
Restrictions None.
Example usage:
To disable the IP interface named “s2”:
DXS-3326GSR:4#disable ipif s2
Command: disable ipif s2
Success.
DXS-3326GSR:4#
delete ipif
Purpose Used to delete the configuration of an IP interface on the Switch.
Syntax
delete ipif <ipif_name 12> | all
Description This command will delete the configuration of an IP interface on
the Switch.
Parameters
<ipif_name 12> − The name of the IP interface the user wishes to
delete.
all – Entering this parameter will delete all the IP interfaces
currently configured on the Switch.
141
To Next Page
Loading...
