D-Link DXS-3326GSR - Page 154

DXS-3326GSR Stackable Gigabit Layer 3 Switch
show igmp group
Purpose Used to display the Switch’s IGMP group table.
Syntax
show igmp group {group <group>} {ipif <ipif_name 12>}
Description This command will display the IGMP group configuration.
Parameters
group <group> − The multicast group ID which the user wishes to
display.
<ipif_name 12> − The name of the IP interface the IGMP group is
part of.
Restrictions None.
Example Usage:
Command: show igmp group
-------------------- ------------------- --------------------- ------------------ -------------------
To display IGMP group table:
DXS-3326GSR:4#show igmp group
Interface Name Multicast Group Last Reporter IP Querier IP Expire Time
System 224.0.0.2 10.42.73.111 10.48.74.122 260
System 224.0.0.9 10.20.53.1 10.48.74.122 260
System 224.0.1.24 10.18.1.3 10.48.74.122 259
System 224.0.1.41 10.1.43.252 10.48.74.122 259
System 224.0.1.149 10.20.63.11 10.48.74.122 259
Total Entries: 5
DXS-3326GSR:4#
146