DXS-3326GSR Stackable Gigabit Layer 3 Switch
delete authen server_group
Parameters <string 15> - Enter an alphanumeric string of up to 15 characters to
define the previously created server group the user wishes to delete.
Restrictions Only administrator-level users can issue this command.
Example usage:
To delete the server group “group_1”:
DXS-3326GSR:4#delete server_group group_1
Command: delete server_group group_1
Success.
DXS-3326GSR:4#
show authen server_group
Purpose Used to view authentication server groups on the Switch.
Syntax
show authen server_group <string 15>
Description This command will display authentication server groups currently
configured on the Switch.
This command will display the following fields:
Group Name: The name of the server group currently configured on
the Switch, including built in groups and user defined groups.
IP Address: The IP address of the server host.
Protocol: The authentication protocol used by the server host.
Parameters <string 15> - Enter an alphanumeric string of up to 15 characters to
define the previously created server group to view.
Entering this command without the <string> parameter will display all
authentication server groups on the Switch.
Restrictions None.
Example usage:
To show the authentication server group:
183
To Next Page
Loading...
