D-Link DXS-3326GSR - Page 197

DXS-3326GSR Stackable Gigabit Layer 3 Switch
enable shh
Syntax
enable ssh
Description This command allows you to enable SSH on the Switch.
Parameters None.
Restrictions Only administrator-level users can issue this command.
Usage Example:
To enable SSH:
DXS-3326GSR:4#enable ssh
Command: enable ssh
Success.
DXS-3326GSR:4#
disable ssh
Purpose Used to disable SSH.
disable ssh
Description This command allows you to disable SSH on the Switch.
Parameters None.
Restrictions Only administrator-level users can issue this command.
Syntax
Usage Example:
To disable SSH:
DXS-3326GSR:4# disable ssh
Command: disable ssh
Success.
DXS-3326GSR:4#
config ssh authmode
Purpose Used to configure the SSH authentication mode setting.
Syntax
config ssh authmode [password | publickey | hostbased]
[enable | disable]
189