EasyManua.ls Logo

D-Link DXS-3326GSR - Page 208

D-Link DXS-3326GSR
354 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
DXS-3326GSR Stackable Gigabit Layer 3 Switch
DXS-3326GSR:4#disable ssl
Command: disable ssl
Success.
DXS-3326GSR:4#
To disable ciphersuite RSA_EXPORT_with_RC4_40_MD5 only:
DXS-3326GSR:4#disable ssl ciphersuite RSA_EXPORT_with_RC4_40_MD5
Command: disable ssl ciphersuite RSA_EXPORT_with_RC4_40_MD5
Success.
DXS-3326GSR:4#
config ssl cachetimeout
Purpose Used to configure the SSL cache timeout.
Syntax
config ssl cachetimeout <value 60-86400>
Description This command will set the time between a new key exchange
between a client and a host using the SSL function. A new SSL
session is established every time the client and host go through a
key exchange. Specifying a longer timeout will allow the SSL
session to reuse the master key on future connections with that
particular host, therefore speeding up the negotiation process.
Parameters <value 60-86400> - Enter a timeout value between 60 and 86400
seconds to specify the total time an SSL key exchange ID stays valid
before the SSL module will require a new, full SSL negotiation for
connection. The default cache timeout is 600 seconds
Restrictions Only administrator-level users can issue this command.
Example usage:
To set the SSL cachetimeout for 7200 seconds:
DXS-3326GSR:4#config ssl cachetimeout 7200
Command: config ssl cachetimeout 7200
Success.
DXS-3326GSR:4#
200

Other manuals for D-Link DXS-3326GSR

Related product manuals