DXS-3326GSR Stackable Gigabit Layer 3 Switch
create access_profile
example, 1:3 specifies switch number 1, port 3. 2:4 specifies
switch number 2, port 4. 1:3-2:4 specifies all of the ports between
switch 1, port 3 and switch 2, port 4 − in numerical order.
all – Denotes all ports on the Switch.
profile_id <value 1-8> − Specifies an index number that will
identify the access profile being created with this command.
Restrictions Only administrator-level users can issue this command.
Example usage:
To create an access list rules:
DXS-3326GSR:4#create access_profile ip vlan source_ip_mask 20.0.0.0
destination_ip_mask 10.0.0.0 dscp icmp type code permit profile_id 101
Command: create access_profile ip vlan source_ip_mask 20.0.0.0
destination_ip_mask 10.0.0.0 dscp icmp type code permit profile_id 101
Success.
DXS-3326GSR
delete access_profile
Purpose Used to delete a previously created access profile.
Syntax
delete access_profile [profile_id <value 1-8>]
Description
The delete access_profile command is used to delete a
previously created access profile on the Switch.
Parameters
profile_id <value 1-8> − Enter an integer between 1 and 8 that is
used to identify the access profile that will be deleted with this
command. This value is assigned to the access profile when it is
created with the create access_profile command.
Only administrator-level users can issue this command. Restrictions
Example usage:
To delete the access profile with a profile ID of 1:
DXS-3326GSR:4# delete access_profile profile_id 1
Command: delete access_profile profile_id 1
Success.
DXS-3326GSR:4#
230
To Next Page
Loading...
