D-Link DXS-3326GSR - Page 25

DXS-3326GSR Stackable Gigabit Layer 3 Switch
DXS-3326GSR:4#show switch_mode
Command: show switch_mode
Switch is in Layer 3 mode
DXS-3326GSR:4#
show device_status
Purpose
Used to display the current status of the hardware of the Switch.
Syntax show device_status
Description
This command displays the current status of the Switch’s
elements.
Parameters
None.
Restrictions
None
Example usage:
To show the current hardware status of the Switch:
DXS-3326GSR:4#show device_status
Command: show device_status
ID Internal Power External power Side Fan Back Fan
--- ---------------- ---------------- ---------- ----------
2 Active Fail OK OK
DXS-3326GSR:4#
show serial_port
Purpose
Used to display the current serial port settings.
Syntax show serial_port
Description
This command displays the current serial port settings.
Parameters
None.
Restrictions
None
Example usage:
To display the serial port setting:
17