D-Link DXS-3326GSR - Page 264

DXS-3326GSR Stackable Gigabit Layer 3 Switch
config sntp
service must be enabled for this command to function (enable
sntp).
Example usage:
To configure SNTP settings:
DXS-3326GSR:4#config sntp primary 10.1.1.1 secondary 10.1.1.2 poll-interval 30
Command: config sntp primary 10.1.1.1 secondary 10.1.1.2 poll-interval 30
Success.
DXS-3326GSR:4#
show sntp
Purpose Used to display the SNTP information.
Syntax
show sntp
Description This command will display SNTP settings information including the
source IP address, time and poll interval.
Parameters None.
Restrictions Only administrator-level users can issue this command.
Example usage:
To display SNTP configuration information:
DXS-3326GSR:4#show sntp
Command: show sntp
Current Time Source : System Clock
SNTP : Disabled
SNTP Primary Server : 10.1.1.1
SNTP Secondary Server : 10.1.1.2
SNTP Poll Interval : 720 sec
DXS-3326GSR:4#
enable sntp
Purpose Enables SNTP server support.
Syntax
enable sntp
256