DXS-3326GSR Stackable Gigabit Layer 3 Switch
disable dvmrp
to enable and disable DVMRP on the Switch.
Parameters None.
Restrictions Only administrator-level users can issue this command.
Example Usage:
To disable DVMRP:
DXS-3326GSR:4#disable dvmrp
Command: disable dvmrp
Success.
DXS-3326GSR:4#
show dvmrp routing_table
Purpose Used to display the current DVMRP routing table.
Syntax
show dvmrp routing table [ipaddress <network_address>]
Description The command is used to display the current DVMRP routing
table.
Parameters
ipaddress <network_address> − The IP address and netmask
of the destination. You can specify the IP address and netmask
information using the traditional format or the CIDR format. For
example, 10.1.2.3/255.255.0.0 or 10.2.3.4/16.
Restrictions None.
Example Usage:
To display DVMRP routing table:
299
To Next Page
Loading...
