DXS-3326GSR Stackable Gigabit Layer 3 Switch
show dvmrp
Purpose Used to display the current DVMRP settings on the Switch.
Syntax
show dvmrp {<ipif_name 12>}
Description The command will display the current DVMRP configurations set
on the Switch.
Parameters
<ipif_name 12> − Using this parameter with this command will
display the DVRMP configurations for the specified IP interface.
Restrictions None.
Example Usage:
To show DVMRP configurations:
DXS-3326GSR:4#
DXS-3326GSR:4#show dvmrp
Command: show dvmrp
DVMRP Global State : Disabled
Interface IP Address Neighbor Timeout Probe Metric State
------------ --------------- --------------- ----- ------ -------
System 10.90.90.90/8 35 10 1 Disabled
Total Entries: 1
302
To Next Page
Loading...
