DXS-3326GSR Stackable Gigabit Layer 3 Switch
To disable PIM on the Switch:
DXS-3326GSR:4#disable pim
Command: disable pim
Success.
DXS-3326GSR:4#
show pim neighbor
Purpose Used to display PIM neighbor router table entries.
Syntax
show pim neighbor {ipif <ipif_name 12> | ipaddress
<network_address>}
Description This command will list current entries in the PIM neighbor table for
a specified IP interface or destination router IP address.
Parameters ipif <ipif_name 12> – The name of an IP interface for which you
want to view the PIM neighbor router table.
ipaddress <network_address> - The IP address and netmask of the
destination routing device for which you want to view the neighbor
router table. You can specify the IP address and netmask
information using the traditional format or the CIDR format. For
example, 10.1.2.3/255.255.0.0 or 10.2.3.4/16.
If no parameters are specified, all PIM neighbor router tables are
displayed.
Restrictions None.
Example usage:
Command: show pim neighbor
To display PIM settings as configured on the Switch:
DXS-3326GSR:4#show pim neighbor
PIM Neighbor Address Table
Interface Name Neighbor Address Expire Time
--------------- ---------------- -----------
System 10.48.74.122 5
Total Entries : 1
DXS-3326GSR:4#
305
To Next Page
Loading...
