D-Link DXS-3326GSR - Page 44

DXS-3326GSR Stackable Gigabit Layer 3 Switch
create snmp user
encryption to be added using the DES-56 standard using:


•
<priv_password 8-16> - An alphanumeric string of
between 8 and 16 characters that will be used to
encrypt the contents of messages the host sends to
the agent.
<priv_key 32-32> - Enter an alphanumeric key string
of exactly 32 characters, in hex form, that will be
used to encrypt the contents of messages the host
sends to the agent.
none – Adding this parameter will add no encryption.
Restrictions Only administrator-level users can issue this command.
Example usage:
To create an SNMP user on the Switch:
DXS-3326GSR:4#create snmp user dlink default encrypted
by_password auth md5 auth_password priv none
Command: create snmp user dlink default encrypted
by_password auth md5 auth_password priv none
Success.
DXS-3326GSR:4#
delete snmp user
Purpose
Used to remove an SNMP user from an SNMP group and also to
delete the associated SNMP group.
Syntax delete snmp user <SNMP_name 32>
Description The delete snmp user command removes an SNMP user from
its SNMP group and then deletes the associated SNMP group.
Parameters
<SNMP_name 32> − An alphanumeric string of up to 32
characters that identifies the SNMP user that will be deleted.
Restrictions
Only administrator-level users can issue this command.
Example usage:
To delete a previously entered SNMP user on the Switch:
DXS-3326GSR:4#delete snmp user dlink
Command: delete snmp user dlink
Success.
36