DXS-3326GSR Stackable Gigabit Layer 3 Switch
create snmp group
SNMP manager is allowed to access on the Switch.
notify_view − Specifies that the SNMP group being created can
receive SNMP trap messages generated by the Switch’s SNMP
agent.
Restrictions Only administrator-level users can issue this command.
Example usage:
To create an SNMP group named “sg1:”
DXS-3326GSR:4#create snmp group sg1 v3 noauth_nopriv
read_view v1 write_view v1 notify_view v1
Command: create snmp group sg1 v3 noauth_nopriv read_view v1
write_view v1 notify_view v1
Success.
DXS-3326GSR:4#
delete snmp group
Purpose Used to remove an SNMP group from the Switch.
Syntax
delete snmp group <groupname 32>
Description
The delete snmp group command is used to remove an SNMP
group from the Switch.
Parameters
<groupname 32> − An alphanumeric name of up to 32 characters
that will identify the SNMP group to be deleted.
Restrictions Only administrator-level users can issue this command.
Example usage:
To delete the SNMP group named “sg1”.
DXS-3326GSR:4#delete snmp group sg1
Command: delete snmp group sg1
Success.
DXS-3326GSR:4#
show snmp groups
Purpose Used to display the group-names of SNMP groups currently
configured on the Switch. The security model, level, and status of
44
To Next Page
Loading...
