DXS-3326GSR Stackable Gigabit Layer 3 Switch
To display the errors of the port 3 of module 1:
DXS-3326GSR:4#show errors port 1:3
RX Frames TX Frames
--------------- ----------------
CRC Error 19 Excessive Deferral 0
Undersize 0 CRC Error 0
Oversize 0 Late Collision 0
Fragment 0 Excessive Collision 0
Jabber 11 Single Collision 0
Drop Pkts 20837 Collision 0
CTRL+C ESC q Quit SPACE n Next Page p Previous Page r Refresh
show utilization
Purpose Used to display real-time port and cpu utilization statistics.
Syntax
show utilization [ports | cpu]
Description This command will display the real-time port and cpu utilization
statistics for the Switch.
Parameters cpu – Entering this parameter will display the current cpu
utilization of the Switch, as a percentage.
ports - Entering this parameter will display the current utilization
of all ports on the Switch.
Restrictions None.
Example usage:
To display the port utilization statistics:
64
To Next Page
Loading...
