D-Link DXS-3326GSR - Page 96

DXS-3326GSR Stackable Gigabit Layer 3 Switch
config stp mst_ports
Restrictions Only administrator-level users can issue this command.
Example usage:
To designate ports 1 through 5 on module one, with instance id 2, to have an auto internalCost and a priority of 16:
DXS-3326GSR:4#config stp mst_config_id ports 1:1-1:5
instance_id 2 internalCost auto priority 16
Command : config stp mst_config_id ports 1:1-1:5 instance_id 2
internalCost auto priority 16
Success.
DXS-3326GSR:4#
show stp
Purpose Used to display the Switch’s current STP configuration.
Syntax
show stp
Description This command displays the Switch’s current STP configuration.
Parameters None.
Restrictions None.
Example usage:
To display the status of STP on the Switch:
Status 1: STP enabled with STP compatible version
DXS-3326GSR:4#show stp
Command: show stp
STP Status : Enabled
STP Version : STP Compatible
Max Age : 20
Hello Time : 2
Forward Delay : 15
Max Age : 20
TX Hold Count : 3
Forwarding BPDU : Enabled
DXS-3326GSR:4#
Status 2 : STP enabled for RSTP
DXS-3326GSR:4#show stp
Command: show stp
88