25
3.3 Device Tab
The Device tab displays the status of all devices in the NAS including
physical drives, disk arrays, logical drives, power supply units, fans and
backplanes.
In the Device tab, you can change settings for the enclosure and physical
drives.
3.3.1 Front View
Click Device tab > Front View to view all of the enclosures found in your
NAS network. Move your mouse over the drive carrier to display the
information of the installed physical drive (as show below), including the
device ID, physical capacity, operational status, etc. Click on the drive to
bring up the Physical Drive Information, displaying the detailed information of
the device.
To Next Page
Loading...