39
Warning!
When you initialize a logical drive, all the data on the logical drive is lost.
Backup any important data before you initialize a logical drive.
3.4.1 Create Disk Array
You can also use the Wizard to create a disk array with logical drives and
spare drives at the same time.
To create a disk array:
1. Click Storage tab > Disk Array.
2. Click the Create Disk Array button.
3. In the Create Disk Array window, complete the required settings:
− In the Alias field, enter an alias at a maximum of 32
characters (includes letters, numbers, space between
characters, and underline).
− Select the Enable Media Patrol option to enable the function
on this disk array; otherwise, clear this option to disable.
− Select the Enable PDM option to enable the function on this
disk array; otherwise, clear this option to disable.
− Select the Enable Power Management option to enable the
To Next Page
Loading...