ShareCenter Pro User Manual
60
− PDM Rate
− Transition Rate
− Reassigned Block Threshold
− Error Block Threshold
− Enable Media Patrol
− Enable Auto Rebuild
For example, to change the Rebuild settings:
1. Click the Rebuild Rate dropdown menu and choose a rate:
− Low – Fewer system resources to the Rebuild, more to data
read/write operations.
− Medium – Balances system resources between the Rebuild
and data read/write operations.
− High – More system resources to the Rebuild, fewer to data
read/write operations.
2. Check the Enable Auto Rebuild box to enable Auto Rebuild (rebuilds
when you swap out the failed drive with a new one).
3. Click the Confirm button.
3.5.5 Firmware updates
Before you update the firmware, download the latest firmware image file to
your PC/Mac
1. Click AdminTool tab > Firmware Update. The NAS Firmware Update
window screen appears showing the current Image Version Number.
2. Click the Browse button to locate the firmware image file, and then click
the Open button.
To Next Page
Loading...